Pressix CC 41 - Channel System
Adapter NT CC 41 DIN 3015
Application
For efficient assembly of fastening clamps DIN 3015 (light and heavy series) to Channels MS 41. Particularly useable for assembly in vertical channels or positions difficult to access, this piece replaces the "3rd hand" and offers following further advantages:
- Compatible with all Sikla Channels MS 41, regardless of the channel's height.
- No getting stuck of screw heads while moving inside the channel.
- Plane fixation without projecting after tightening.
Scope of delivery
Channel nut, spring and thread connection pre-assembled.
Installation
After inserting the Adapter CC 41 into the channel opening, slightly press on the thread connection. The piece automatically turns into position. Postion the fastening clamp and tighten the screws.
Neither assembly nor removal require a tool and are repeatable as much as is necessary.
Technical Data
Material: | |
Channel nut, thread connection: | Steel, electro-galvanised |
Spring washer: | Spring steel sheet, rustproof |
Pipe clamps DIN 3015-1 (series A, light range)
Pipe size | Pipe-outer dia. [mm] | Connection with with | e1 |
---|---|---|---|
0 | 6 to 12 | 1 x Adapter NT CC 41 M6 | |
1 | 6 to 12 | 2 x Speed Nuts CC 41 M6 | 20 1) |
2 | 12.7 to 18 | 2 x Speed Nuts CC 41 M6 | 26 1) |
3 | 19 to 25 | 2 x Speed Nuts CC 41 M6 | 33 1) |
4 | 26.9 to 30 | 2 x Adapters NT CC 41 M6 | 40 |
5 | 32 to 42 | 2 x Adapters NT CC 41 M6 | 52 |
6 | 44,5 to 57 | 2 x Adapters NT CC 41 M6 | 66 |
7 | 57.2 to 76.1 | 2 x Adapters NT CC 41 M6 | 94 |
8 | 88.9 to 101.8 | 2 x Adapters NT CC 41 M6 | 120 |
Pipe clamps DIN 3015-2 (series C, heavy-load range)
Pipe size | Pipe outer dia. [mm] | Connection with | e1 |
---|---|---|---|
1 | 6 to 18 | 2 x Speed Nuts CC 41 M10 | 33 1) |
2 | 19 to 30 | 2 x Adapters NT CC 41 M10 | 45 |
3 | 30 to 42 | 2 x Adapters NT CC 41 M10 | 60 |
4 | 38 to 70 | 2 x Adapters NT CC 41 M12 | 90 |
1) | For these hole distances, the screw plate of the Clamp (see image 4), as well as each two Hexagon bolts and Channel Nuts NT CC 41 are necessary. |
Pipe Clamps DIN 3015-3 (series B, double range)
Pipe size | Pipe outer dia. [mm] | Connection with |
---|---|---|
1 | 6 to 12 | 1 x Adapter NT CC 41 M6 |
2 | 12.7 to 18 | 1 x Adapter NT CC 41 M8 |
3 | 19 to 25 | 1 x Adapter NT CC 41 M8 |
4 | 26.9 to 30 | 1 x Adapter NT CC 41 M8 |
5 | 32 to 42 | 1 x Adapter NT CC 41 M8 |