Stainless Steel Standard Range
Assembly Set MS 5P ss
Application
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.
Scope of delivery
Type | Beam Clip [Anzahl] | Support plate [Anzahl] | ss trimming * [Anzahl] |
---|---|---|---|
M12 S | 4 x M12 | 4 x M12 | 4 x M12 x 80 |
M12 S2 | 2 x M12 | 2 x M12 | 2 x M12 x 80 |
M16 S | 4 x M16 | 4 x M16 | 4 x M16 x 100 |
M16 S2 | 2 x M16 | 2 x M16 | 2 x M16 x 100 |
* ss trimming consisting of: Hexagon bolt M12 or M16, 1 washers, 1 hexagon nut (polymer-lubricated)
Installation
1. | Position Beam Clip with the split end on beam section. |
2. | Install support plate and ss trimming and tighten accordingly. |
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the ss trimming a continuous and predictable preload force is guaranteed.
Technical Data
Type | Size range [mm] | Tightening torque MA [Nm] / plus 90° revolution | Fy permitted per Beam Clip [kN] | Shear force load capacity Fz per set = 4 Beam Clips kN] |
---|---|---|---|---|
M12 S | 1 - 30 | 60 / 90° | 17.6 | 8.1 * |
M16 S | 4 - 40 | 140 / 90° | 19.8 | 8.4 * |
* The specified data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µadhesion = 0,20
A possibly operating tensile force Fy isn't included.
Material: | Stainless steel A4 |