Nail Anchor AN
Application
Suitable for the quick and easy mounting of components to a concrete soffit or shear wall. The internal dual thread M8/M10 allows for a direct easy connection with the Nail Anchor (e.g. M&E service supports).
The reduced drilling depth of 35 mm and the bore dia. of 6 mm minimise the risk of hitting a rebar during installation and reduces the overall cost of drilling.
Installation
Fast and simple setting of the Nail Anchor AN N M8/M10:
1. Drilling
2. Cleaning of bore hole
3. Hammer in - ready!
Technical Data
Anchoring depth 25 mm | Anchoring depth 30 mm | |
---|---|---|
adm. load in the tensile zone [kN] for anchorage in concrete accord. to approval ≥ C20/25 | 2.14 | 2.81 |
Centre distance scr ≥ [mm] | 100 | 100 |
Edge distance ccr ≥ [mm] | 100 | 100 |
min. thickness of concrete slab hmin [mm] | 80 | 80 |
Drill hole dia. do [mm] | 6 | 6 |
Depth of drill hole h1 ≥ [mm] | 35 | 40 |
Effective anchorage depth hef ≥ [mm] | 25 | 30 |
Length L [mm] | 25 | 25 |
Thread | M8/M10 | M8/M10 |
adm. load for fire exposure 1) | ||
30 min. N(30) [kN] | 0.6 | 0.8 |
60 min. N(60) [kN] | 0.6 | 0.7 |
90 min N(90) [kN] | 0.6 | 0.6 |
120 min. N(120) [kN] | 0.5 | 0.6 |
R 30 bis R120 | ||
Centre distance scr ≥ [mm] | 100 | 100 |
Edge distance ccr ≥ [mm] | 50 | 50 |
1) Strength class ≥ 5.8 with threaded rod
Valid are the values of the mentioned approval which can be seen on our website www.sikla.com/service/downloads.
Material: | Steel, zinc-plated |
Approvals / Conformity
Sikla approval ETA-13/0048
For the multiple use for non-structural applications in concrete (min. C12/15 and max. C50/60). Fire protection testing, VdS-conform
| |
Nail Anchor AN - ETA 13/0048 PDF | 1.5 MB