Ducting Supports
Ducting Clamp PLU 2G-N with lining
Application
Two-piece pipe clamp for simple installation of spiral-seam ducts.
Suitable for soundproof installation according to DIN 4109.
Scope of delivery
Clamping bolts are pre-mounted and retained. Pivot screw for safe and simple assembly with quick-set clip, suitable for "single-hand" mounting. Easier handling and better storage possibilities due to optimized packaging.
Installation
Tighten upper part of the pipe clamp without the interfering lower part.
Hook lower part, provided with a keyhole, into the fixed clamping bolt (see picture).
After inserting the pipe and locating into the pivot screw, the clamping bolt head is located behind the angled profiles; then tighten clamping bolt with max. 2 Nm.
Technical Data
| Type | Material [mm] | Perm. load capacity [kN] | Thread connection |
|---|---|---|---|
| 71 - 200 | 20 x 1.5 | 0.8 | M8/M10 |
| 224 - 500 | 25 x 1.5 | 1.0 | M8/M10 |
| Material: | Steel, galvanised |
| Insulation insert: | SBR/EPDM black (rubber Profile - see chapter Sound Absorption Products) |
| Temperature range: | -50°C up to +110°C |