Sections and Welded End-Plate Beams
Beam Bracket TKO F 100/160
Application
Galvanised box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA/End Support WBD and 4 Self Forming Screw FLS.
Scope of delivery
Pre-assembled with End Cap ADK F 100/160.
Installation
Depending on the situation, the following installation types are recommended:
| a) | Direct to building structures: 4 suitable wall anchors. |
| b) | To traditional steel beams between 80 - 120 mm flange dimensions: with on-demand Adaptor Plate. |
| c) | To traditional steel beams > 120 flange dimension: with on-demand Adaptor Plate. |
Technical Data
| Type | L [mm] | Dimensions of base plate [mm] | Slots in base plate for |
|---|---|---|---|
| TKO F 100/160-800 | 800 | 280 x 280 x 12 | M12 |
| TKO F 100/160-1200 | 1200 | 280 x 280 x 12 | M12 |
| Configuration: | Base plate welded to Beam Section F 100/160 |
| Material: | |
| Base plate | Steel, HCP |
| Beam section | Steel, HCP |
Declaration of performance Beam Bracket TKO F PDF | 125.2 KB
Approvals / Conformity
CE mark (Declaration of performance see www.sikla.co.uk/service/downloads)
ETA-24/0471
